 |
1. The pattern for the breaching dolphin
was originally designed for a piece of stone 7 1/2 inches by
3.5 inches by 2 inches. For a smaller or larger piece of stone
change the pattern proportionally. After cutting out your pattern,
Place it on the stone and trace around it with a pencil or marker.
When placing the pattern on the stone, the grain should be oriented
along the length of the Breaching Dolphin. |
 |
2. . I have used a bandsaw to cut out the majority
form of the this breaching dolphin. I use a 1/4 inch skip tooth
blade.
|
 |
3. After marking the center line on the
stone, mark where the narrowest part of the dolphin's body will
be.
|
|